|
Section 08120
Specifications
Aluminum Frames
-1
PART 1 -
GENERAL
1.01 SUMMARY
A. Section
Includes:
1. Aluminum frames
for interior wood doors and glazed openings.
2. Preparation of
door frames for finish hardware.
B. Related
Work:
1. 08200 Wood
Doors.
2. 08710 Finish
Hardware
3. 08800 Glass and
Glazing
1.02
SUBMITTALS
A.
Shop Drawings: Indicate pertinent dimensioning, general
construction, component connections and locations anchor methods
and locations, installation details.
B Submit samples of color
and finish on aluminum frame material; minimum 6 inches
long.
1.03 QUALITY
ASSURANCE
A.
Reference specifications and standards: Comply with manufacturer's
recommendations and the following unless otherwise specified in
this Section. In case of conflict, comply with the most
stringent.
1. NAAMM - Metal
Finishes manual, National Association of Architectural Metal
Manufacturers.
2. ASTM B221 -
Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods,
Wires, Shapes and Tubes.
3. ASTM E 152 -
Methods of Fire Tests of Door Assemblies.
4. NFPA 252 - Fire
Tests for Door Assemblies.
1.04 DELIVERY, STORAGE
AND HANDLING
A. Deliver materials
in manufacturer's packaging complete with installation
instructions.
1.05
WARRANTY
A. The work hereunder shall be warranted for a
period of not less than one year against defects in materials and
workmanship.
PART 2 -
PRODUCTS
2.01
GENERAL
A. Comply with the
requirements of the referenced standards.
2.02
MATERIALS
A. Acceptable
Manufacturer: ECLIPSE SYSTEMS, INC., Milpitas, Ca - (408)
263-2201
B. Frame Profiles:
Standard Trim, Flush Trim, Compression
C. Aluminum: 6063-T5
alloy and temper
D. Finishes:
Commercial Dark Bronze, Commercial Clear, Factory Finish Custom
Color
| 
